Cypress Semiconductor /psoc63 /BLE /BLELL /PEER_ADDR_INIT_L

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as PEER_ADDR_INIT_L

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0PEER_ADDR_L

Description

Lower 16 bit address of the peer device for INIT.

Fields

PEER_ADDR_L

Lower 16 bit of 48-bit address of the peer device. This is used only in MMMS mode

The peer address registers are used for multiple purposes. The register is written by firmware to provide the peer address to be used for a hardware procedure. When firmware reads the register, it reads back peer address values updated by hardware.

While device is configured as an initiator without white list filtering, the peer address specified in the peer_address field of the create connection command is programmed into this register, which is used by hard-ware procedures.

While device is configured as an initiator and white list is enabled, firmware can read this register to get the address of the peer device from which connectable ADV packet was received and to which the connection is created.

Links

() ()